Featured 
Fas-Trac® III Suspension
Ensuring your workforce wears their safety helmets can be a real headache. MSA, the leading provider of protective helmets, has the perfect remedy: the Fas-Trac® III Suspension. No more pressure headaches. No more pulled hair. No more falling off. No more sacrificing worker comfort for safety. Market-leading MSA helmets now have a comfort-leading suspension!
Featured 
Push-Key Suspension
The Push-Key safety helmets suspension with its innovative adjustment concept brings an extraordinary way to enhance your workforce retention and comfort. Push-Key, the new harness designed exclusively for MSA V-Gard® Industrial Helmets, with the best cost-benefit ratio offered in the market. You can adjust it with one hand even when worn. There is no denying how much a simple "Push" changes everything!
Featured 
V-Gard® C1™ Hard Hat
The V-Gard C1™ Hard Hat uses patent-pending ReflectIR™ Thermal Barrier technology to keep the inside of the hard hat up to 20°F (11°C) cooler* in sunny weather, making it the coolest hard hat on the market compared to those without ReflectIR™.
Featured 
V-Gard® Hard Hat Cap Style
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
Featured 
V-Gard® H1 Safety Helmet
The V-Gard® H1 Safety Helmet provides exceptional comfort and ease of use in a stylish low-profile hard hat design. A complete above-the-neck platform for all applications.
Featured 
V-Gard® Matte Hard Hat
The features that have set the MSA V-Gard as a world leader in head protection remain, comfort, durability, customization and support, the matte finish provides a new twist on style, without sacrificing safety or performance.
Featured 
V-Gard® Full Brim Hard Hats
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
Featured 
V-Gard® 950 Non-Vented Protective Cap
Balanced and lightweight electrician's safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension, GS-ET-29 class 1 (4kA) face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist.
Featured 
V-Gard® 950 Class 2 Non-Vented Protective Cap
The V-Gard 950 Class 2 safety helmet has been developed for electrical activities requiring demanding arc flash protection up to 7kA. This balanced and lightweight unvented electrician's helmet features an integrated GS-ET-29 Class 2 (7kA) faceshield with a light transmittance ≥ 75% and a MSA-unique extended neck & ear flaps protection.
Featured 
V-Gard® 930 Vented Protective Cap
Balanced, modern, low-profile head and integrated eye protection – in one vented industrial hard hat with 6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particles hazards to the eyes exist. With clear or tinted over spectacles.
Featured 
V-Gard® 930 Non-Vented Protective Cap
Balanced, modern, low-profile head and integrated eye protection – in one non-vented industrial hard hat , with 6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particles hazards to the eyes exist. With clear or tinted over spectacles.
Chinstraps for MSA Hard Hats
Put and keep MSA helmets in their place with these comfortable, adjustable chinstraps. Available in two styles; suspension-attached and shell-attached.
Chinstraps for V-Gard Industrial Helmets
Put and keep MSA hard hats in their place with adjustable chinstraps in different styles. Two different materials and the selection between 2 or 4 point mounting accommodates the varied conditions of use and working environment.
MO 5006 Series
MO 5006 Helmet provides both comfort and protection when danger is high. The jet-shaped helmet is intended for riot control and law enforcement duties where there are risks of projectiles, gas, smoke and more. The area between the helmet shell and visor is waterproof, while the visor, helmet and neckcurtain are resistant to penetration, chemical aggression and flames. To ensure communication is possible, the helmet is fully compatible with breathing masks and communication systems. The inner parts of helmet can be easily dismantled and washed, while the 3-point-chinstrap contains a locking buckle and an anti-strangulation system.
SunShade Hard Hat Accessory
Keep workers cool and comfortable on the job with this lightweight, mesh ear and neck shade. Easily attaches to hardhat or cap to protect from sun and heat. Features a contrasting color band and reflecting stripe to increase wearer visibility. Three strategically placed clips keep the shade from slipping or turning. Won’t interfere with MSA face shields and frames.
SunShades
MSA SunShades not only help to protect wearer’s ears and neck from sun and heat, but also enhance worker visibility with contrasting color band and reflective striping. Fit most hats and caps.
Terri-Band Sweatbands
Protect eyes and face from sweat and drips with these absorbent and comfortable sweatbands. Easily snaps into all MSA industrial helmets. Makes helmets fit better, too. Machine washable.
Medical Information Carrier System
This small, inexpensive hardhat accessory can save lives because it provides crucial medical and contact information in the event of an emergency. Tucks inside the helmet shell. Includes a polyolefin film data form, heavy-duty neon carrier, high-tech tape and reflective helmet decal. An MSA exclusive in industrial environments.
V-Gard® 500 Vented Hard Hat Cap Style
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
V-Gard® 500 Non-Vented Hard Hat Cap Style
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
